Properties

  • Ready to use 2-component epoxy-based anchor adhesive
  • Suitable for dry and wet non-cracked concrete
  • Applicable with threaded rods and rebars
  • Rapid strength development for early initial loading
  • High compressive and tensile strength
  • Thixotropic and stable for vertical and overhead application
  • Very low application temperature
  • REACH exposure: water contact permanent, inhalation periodic, processing and application
  • Environmental Product Declaration EPD

Applications

  • Anchoring work for static and quasi-steady loads in horizontal, vertical and overhead areas
  • Approved system for use in uncracked concrete from C20/25 to C50/60
  • Anchoring for dry and permanent wet interior and exterior components, with and without especially aggressive conditions
  • Anchoring of threaded rods and rebars for fixings of attachements e.g. consoles, railings, storage racks, awnings, scaffolding, suspended ceiling, building technology, etc.
  • Approved as bonded anchor according to European Technical Assessment (ETA-15/0506)
  • Manual application with the MC-Fastpack Power-Tool

Downloads

abs 123 abs 123 abs 123 abs 123 abs 123 abs 123 abs 123